English

ELS010 Switch

ELS010 Switch

Designed for FTTB access networks; supports 48 ports for subscriber lines (10/100), 4 separate ports for uplink and cascade connection (two 10/100/1000 ports and two 1000 ports (SFP)). Dual redundant power supplies (optional). Passive cooling

Quantity and types of ports: 

Number of ports 48 Ethernet 10/100 ports, 
2 Gigabit Ethernet (SFP) ports, 
2 Ethernet 10/100/1000 ports

  

Form factor and power supply:

Form factor 19-inch 1 RMU metal case
Dimension, (WхDхH) 430х275х43 mm
Weight, max 3.6 kg
Voltage 90-264VAC
Power input, max 30 W
Cooling system Passive
Acoustic noise 0 dB

  

Hardware parameters:

Switching method Non-blocking, Store-and-forward
Total MAC Address Space Available 16K
VLAN IDs 4094
Flash 128 MB
DRAM 256 MB
CPU 500 MHz

 

Operating environment:

Operating Temperature 0° to 40°C
Operating Relative Humidity 10% to 90% (non-condensing)
Storage Temperature -50° to 50°C
Storage Relative Humidity 10% to 95% (non-condensing)

  

 Functional capabilities:

Interfaces Automatic media-dependent interface crossover (MDIX)
Half-duplex / full-duplex mode
Speed autonegotiation
Loopback detection
MAC Address Table 16K MAC addresses
Adjustable storage time of dynamic records
Static MAC Entries
VLAN 4094 static VLAN
Dynamic VLAN setting
802.1Q
Spanning Tree Protocol 802.1D 
PVST+ (up to 32 instances)
BPDU Filter
BPDU Guard
IGMP IGMP v1, v2
IGMP snooping with Immediate Leave
MVR (Multicast VLAN Registration):
a) IGMP Querier;
b) Immediate Leave
Security MAC addresses filter on each port
Errdisable Port State
DHCP snooping
DHCP Relay
Dynamic ARP Inspection
802.1х access control with RADIUS support
Quality of service (QoS) 4 queues per port
Queue Handling:
a) Strict Priority; 
b) Weighted Round Robin (WRR).
CoS based on:
a) 802.1p priority queue;
b) DSCP.
Bandwidth management:
a) port-based; 
b) with predefined granularity
Control plane policing
Management and monitoring Command Line Interface (CLI) (Telnet, SSH)
SNMPv2с
TFTP client for loading and saving configuration files
FTP client for loading configuration files
Syslog
NTP
Local authentication
Command logging
Auto-configuration system
LLDP 
Switched port analyzer (SPAN, RSPAN)
Remote monitoring (RMON)
Temperature monitoring
Power supply monitoring
Secondary voltage monitoring
Service features Cable diagnostic: length/ resistance/ short-circuit / opened pairs.

 

Ordering information:

Elsicom ELS010-1PS 48 Ethernet 10/100 ports, 
2 Gigabit Ethernet (SFP) ports, 
2 Ethernet 10/100/1000 ports
1 internal power supply 220VAC
Elsicom ELS010-2PS 48 Ethernet 10/100 ports, 
2 Gigabit Ethernet (SFP) ports, 
2 Ethernet 10/100/1000 ports
2 internal redundant power supplies 220VAC
PWR-220VAC-ELS010 Additional power supply